In this article GE Honda HF120 will be analyzed in detail, with the aim of delving into its importance, impact and relevance in today's society. GE Honda HF120 is a topic that has gained great interest in recent years, and its influence covers different areas, from technology to culture. Through a multidisciplinary approach, various aspects related to GE Honda HF120 will be addressed, such as its history, evolution, implications and possible future scenarios. By collecting data, expert opinions and critical analysis, this article seeks to provide a comprehensive and updated vision of GE Honda HF120, in order to contribute to the debate and reflection on this topic.
HF120 | |
---|---|
![]() | |
Type | Turbofan |
National origin | Japan/United States |
Manufacturer | GE Honda Aero Engines |
First run | 2009[1] |
Major applications | Honda HA-420 HondaJet |
The GE Honda HF120 is a small turbofan for the light business jet market, the first engine to be produced by GE Honda Aero Engines.
Succeeding Honda's original HF118 prototype, the HF120 was undergoing testing in July 2008, with certification targeted for late 2009.[2] The first engines were produced at GE's factory, but in November 2014 production shifted to Burlington, North Carolina.[3] The U.S. Federal Aviation Administration (FAA) awarded Part 33 certification to the HF120 turbofan engine in December 2013, and production certification in 2015.[4]
The engine has a wide-chord swept fan, two-stage low-pressure compressor and counter rotating high-pressure compressor based on a titanium impeller, for a 2,050 lbf (9.1 kN) takeoff thrust.[5] The HF120 engine's components interact with greater efficiency by incorporating 3D aerodynamic design, and its effusion-cooled combustor design emits low NOx, CO and HC. Noise levels are quieter than Stage 4 requirements.[6]
In May 2016 time between overhaul was 2,500 h, which was expected to mature to 5,000 h; a midlife hot-section inspection is not required, and it is expected to remain on wing 40% longer than other engines and have lower operating costs.[7]
Besides the HondaJet, HF120 was announced as a retrofit to the Cessna CitationJet CJ1 by Sierra Industries,[8] in partnership with GE Honda.[9]
In addition, Spectrum Aeronautical has announced it is planning to use HF120 for its upcoming S-40 Freedom.[10]
Data from Honda[11]
Related lists