Bensen B-7

In today's world, Bensen B-7 has become a topic of great importance and relevance. There are many aspects that Bensen B-7 covers, from its impact on society to its influence on the world economy. In this article, we will explore in depth the role that Bensen B-7 plays in our daily lives, examining its different dimensions and how they affect various aspects of our daily lives. Additionally, we will analyze the current and future trends of Bensen B-7, as well as its evolution over time. Without a doubt, Bensen B-7 is a topic that deserves our attention and reflection, since its importance only grows over the years.

B-7
Role Recreational rotor kite (Gyroglider)/autogyro
National origin USA
Manufacturer Bensen Aircraft for homebuilding
Designer Igor Bensen
First flight 17 June 1955

The Bensen B-7 was a small rotor kite developed by Igor Bensen in the United States in the 1950s and marketed for home building. It was a refined to be a slightly larger version of the B-6, replacing the skids with a tricycle undercarriage, and adding a single large fin to the rear of the aircraft.

The B-7 was first towed aloft on 17 June 1955, and on 6 December that year, Bensen flew a motorized version designated the B-7M, a fully autonomous autogyro. The prototype B-7M crashed three days later with Bensen at the controls. Although the machine was soon repaired and in the air again, the incident set Bensen to work on further refinements to the design that would eventually lead to the B-8.

Variants

Data from: Jane's All the World's Aircraft 1958-59[1]

B-7
The basic gyro-glider
B-7B Gyro-boat
A Gyro-glider mounted on a standard sailing dinghy hull.
B-7W Hydro-glider
The B-7W "Hydroglider" was a gyrocopter designed to be towed from a motorboat at 10-20 mph. The B-7W was tested at Cypress Gardens Florida in 1955. It was marketed to be a sport vehicle, with practical uses in fish or submarine spotting. The floats were modified from a Republic Seabee.[2]
B-7M
A powered version of the B-7 with a Nelson H-59 4-cylinder 2-stroke horizontally-opposed engine driving a pusher propeller, mounted behind the pilot.

Specifications (B-7M)

Data from Jane's All the World's Aircraft 1958-59[1]

General characteristics

  • Crew: 1
  • Length: 8 ft 0 in (2.44 m) [citation needed]
  • Height: 5 ft 4 in (1.63 m) [citation needed]
  • Empty weight: 185 lb (84 kg)
  • Gross weight: 435 lb (197 kg)
  • Fuel capacity: 6 US gal (5.0 imp gal; 22.7 L)
  • Powerplant: 1 × Nelson H-59 4-cylinder air-cooled 2-stroke horizontally-opposed piston engine, 42 hp (31 kW) [citation needed]
  • Main rotor diameter: 20 ft 6 in (6.25 m)
  • Main rotor area: 330.1 sq ft (30.67 m2) free-turning
  • Blade section: Bensen G2[3]
  • Propellers: 2-bladed fixed-pitch pusher propeller

Performance

  • Maximum speed: 136 mph (219 km/h, 118 kn) [citation needed]
  • Cruise speed: 60 mph (97 km/h, 52 kn)
  • Minimum speed: 19 mph (17 kn; 31 km/h) in still air
  • Range: 120 mi (190 km, 100 nmi)
  • Service ceiling: 12,500 ft (3,800 m) [citation needed]
  • Rate of climb: 1,000 ft/min (5.1 m/s) [citation needed]

References

  1. ^ a b Bridgman, Leonard, ed. (1958). Jane's All the World's Aircraft 1958-59. London: Jane's All the World's Aircraft Publishing Co. Ltd. pp. 262–263.
  2. ^ "The Cover Story". Experimenter. November 1955.
  3. ^ Lednicer, David. "The Incomplete Guide to Airfoil Usage". m-selig.ae.illinois.edu. Retrieved 16 April 2019.

Further reading

  • Charnov, Bruce (2003). From Autogiro to Gyroplane: The Amazing Survival of an Aviation Technology. Praeger. p. 226.
Wikimedia Commons has media related to Bensen B-7.