Airwolf 3D

In this article we will delve into Airwolf 3D, a topic of great relevance today. Airwolf 3D is a point of interest that has captured the attention of experts, academics and the general public due to its impact on various aspects of daily life. Through detailed analysis and exhaustive exploration of its different aspects, we seek to better understand the implications of Airwolf 3D in today's world. Furthermore, we will examine its evolution over time and its influence in different fields, in order to offer a comprehensive vision that enriches the debate around this topic. Without a doubt, Airwolf 3D is a topic that arouses great interest and controversy, so it is essential to address it with the seriousness and depth it deserves.

This article is about the 3D Printing Company. For the television show, see Airwolf.
Airwolf 3D
Company typePrivate
Industry3D printing
FoundedMay 2012
FounderErick Wolf and Eva Wolf
Headquarters
Costa Mesa, California
,
United States
Key people
Erick Wolf, Chairman and Mark Mathews, President
Products3D printers
Number of employees
25–30
Websitewww.airwolf3d.com

Airwolf 3D is a 3D printer designer headquartered in Costa Mesa, California. It was founded in 2012 by Eva and Erick Wolf.

History

Airwolf 3D was founded in May 2012 by Erick Wolf and his wife Eva. The idea for the company originated after Erick purchased a 3D printer in late 2011. While attempting to use the printer to create replacement parts, he encountered difficulties and limitations in the machine's capabilities.[1] This led Erick to develop the first Airwolf 3D model.

The original Airwolf printer (v.4) was derived from the Prusa Mendel and Mecano Air designs, hence the name "Airwolf."[2]

The company started shipping fully assembled 3D printers in June 2012 from their garage in Newport Beach, California. The first printer was sold to Lars Brubaker and Kevin Pope of MatterHackers. MatterHackers went on to develop MatterControl, a 3D printing software.[3]

Products

AW3D 5.5

AW3D v.4; Forerunner to the 5.5 and XL

The AW3D 5.5 was introduced in late 2012 and superseded the v.4 and v.5.

AW3D XL

The AW3D XL was introduced in January 2013. The maximum printing surface is approximately 12" x 8" x 7". It operates on a RAMBo board made by Ultimachine.[4]

AW3D HD

The Airwolf 3D model HD was a 3D printer equipped with a single print head which was capable of layer-to-layer resolutions as fine as 0.06 mm (0.002 in).

The AW3D HD was introduced in November 2013 at the 3D Print Show in Paris, France. It featured a print area of approximately 12" x 8" x 12".[5] The AW3D HD featured a print volume of 12" x 8" x 12" (1150 in3) and had a layer-to-layer resolution of 0.06 mm (0.002 in). The HD was equipped with a single print head that came standard with a 0.5 mm nozzle or a 0.35 mm nozzle as an option.[6]

AW3D HDL

Airwolf 3D model HDL. This 3d printer was offered with an unheated print bed and a single print nozzle capable of a 0.08 mm layer-to-layer print resolution.

The AW3D HDL was the Airwolf 3D base model 3D printer. It was equipped with an unheated print bed and a single print head capable of sustained temperatures of 260 °C (500 °F). The AW3D had a print resolution of 0.08 mm with a maximum print speed of 150m m/s. The AW3D had a build volume of 12" x 8" x 11" (1056in3) and came standard with 0.5 mm print nozzle or a 0.35 mm nozzle optional.[7]

AW3D HDx

The Airwolf 3D model Hdx. This 3d printer included a proprietary JRX print head capable of sustained temperatures of approximately 315 °C (599 °F).

The AW3D HDx was introduced in May 2014. The HDx uses the JRx hot end and can continuously hold temperatures of up to 599 °F (315 °C).The HDX had a print volume of 12" x 8" x 12" (1150 in3) and had a layer-to-layer resolution of 0.06 mm (0.002 in).[8] The HDx was selected as Editor's Pick of the Week by Desktop Engineering.[9]

AW3D HD2x

The AW3D HD2x was a dual-head 3D printer that was introduced in 2014. The HD2x featured a dual print head capable of sustained temperatures of 315 °C (599 °F). The original HD2x was designed for traditional hard-wired printing and slicing functionality; however, wireless capability was later provided by Airwolf 3D's Wolfbox wireless controller. The HD2x was capable of printing in two different colors or two different materials simultaneously, provided that the two materials had similar extruding temperatures. The HD2x had a print volume of 11" X 8" x 12" (1056in3) and offered a layer-to-layer resolution as fine as 0.06 mm (0.002 in).[10]

AW3D HD-R

The AW3D HD-R was introduced at the 2015 Consumer Electronics Show.[11] The HD-R was the first Airwolf 3D model to offer integrated Wi-Fi and cloud based slicing, file storage, and file management based on the AstroPrint platform by 3DaGoGo.[12] The HD-R came equipped with dual print heads, each capable of sustained temperatures of 315 °C (599 °F). The dual print head configuration allowed the user to print with two different colors or two different types of filament, provided that the filaments had similar extruding temperatures. The HD-R was built with an improved aluminum backbone for rigidity,[11] and had a maximum build envelope of 11" x 8" x 12" (1056 in3).[13] The HD-R had a print resolution of 0.06 mm (0.002 in) and came standard with a 0.5 mm nozzle or an optional 0.35 mm nozzle.[13]

Wolfbite

Wolfbite is a 3D printing adhesive to facilitate the bonding and removal of nylon and nylon blend prints from glass and ceramic build plates. The product was formulated to solve the problems of warping and adhesion that are inherent when 3D printing with nylon.[14]

See also

References

  1. ^ Hamilton, Ian (July 11, 2013). "3D printing builds on itself". Orange County Register. Retrieved November 30, 2013.
  2. ^ Knight, Terry (August 13, 2012). "3D Additive Manufacturing at Airwolf 3D Printers - NI Week 2012". Engineering TV. Retrieved August 13, 2012.
  3. ^ Casacchia, Chris (March 17, 2014). "The New Fine Print". Orange County Business Journal. Retrieved March 17, 2014.
  4. ^ van West, Anja (April 6, 2013). "Airwolf releases affordable large-scale 3D printer". www.3ders.org. Archived from the original on June 5, 2014. Retrieved June 2, 2014.
  5. ^ Horsey, Julian (November 23, 2013). "Airwolf 3D AW3D HD New Larger Desktop 3D Printer Unveiled". Geeky Gadgets. Retrieved June 2, 2014.
  6. ^ "AW3D HD Offers a Huge Build Volume of 1,150 cubic inches". Airwolf 3D.
  7. ^ "AW3D HDL - Airwolf 3d Printers". Archived from the original on 2015-02-21. Retrieved 2015-02-21.
  8. ^ "AW3D HDX - Airwolf 3d Printers". Archived from the original on 2014-12-03. Retrieved 2015-02-21.
  9. ^ Lockwood, Anthony J. (May 28, 2014). "Editor's Pick: Personal 3D Printer Uses Engineering-Grade Materials". Desktop Engineering. Archived from the original on May 31, 2014. Retrieved May 28, 2014.
  10. ^ "Airwolf 3D AW3D HD2x". airwolf3d.com. Airwolf 3D. Archived from the original on 21 February 2015. Retrieved 20 February 2015.
  11. ^ a b "3D printing takes another huge step forward at CES 2015 - ExtremeTech". www.extremetech.com. 12 January 2015.
  12. ^ "Airwolf 3D Unveils New Desktop Printer with Unparalleled Industry Standards" (PDF). airwolf3d.com/. January 6, 2015. Retrieved 10 May 2023.
  13. ^ a b Airwolf 3D HDR airwolf3d.com
  14. ^ "Airwolf 3D launches Wolfbite NITRO 3D printing nylon adhesive". TCT Magazine. 2016-02-04. Retrieved 2018-05-18.